1983’ mini-crawler RN48 “Clementine” Build
By mesa man
Finally Inspired enough to start a build thread on this beauty I scored a few years ago by mere chance!
Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By mesa man
Finally Inspired enough to start a build thread on this beauty I scored a few years ago by mere chance!
By ccasteel
My son in law had a cracked head replaced less than 1000 miles ago. He ran out of diesel one week ago. But it ran fine for the next week. Two days ago it made a fizzing sound (almost like a pop can opening) and lost power. He had it towed to me and after sitting a couple days we started it tonight. It runs rough and barely stays running with the accelerator fully down. Grey smoke was pouring out the back and some under the hood. The drained oil has some bubbles in it, but is not milky in any... Read more
By Davidsel47
Im thinking of getting some steel wheels for my 100, just basic black steel. will they make a big difference in fuel and performance?
By cruisermatt
Rusty Canada frame. Still straight and could be used for a beater 45 build. Rear spring perches are gone (last shop knocked the rivets out) but I would retrofit the later bigger bushing perches (available new) as an upgrade No VIN Located in Orlando Asking $300.
By theglobb
I got a real crust-bucket of a 60 for free a while back. I'm about to cut it and turn it into a flatbed pickup truck but before that, there's a mechanical issue that worries me. The crank wobbles, it has done it for the past 6,000 miles or so. Obviously this can't be a good thing but I've never dealt with this before, so I'm wondering what it may be. a video is below My guess is the harmonic balancer is failing but I'm wondering if anything else (other... Read more
By DangerNoodle
I pulled the ole 2LT from my 70 for a swap, is it even worth trying to get rid of or worth much in parts? If so, what would you think fair value would be? It's definitely low compression but I have ran it. About 190k miles, from a '92. Fully dressed, 100% complete with harness. Thanks!
By ceylonfj40nut
Been on Mud for a while. Have the addiction. Done a few projects in my driveway and on my back. Have a few Cruisers. My boys are at an age that is right to get them confident in many things in life thru wrenching. My dad taught me so much. Watching and doing alongside. Not to fear much. Dive in. Time to pass it on. This hopefully shares our story about our journey in time and all that happens in our wrenching cave. The Elf Barn. My Home garage was hard to get things done. Bought my last... Read more
By Davidsel47
My daughter hit a deer and im looking for a used set or new set of headlights for a 2008, can anyone point me in the right direction?
By EmptyLord
Long time toyota guy ( I have 5 first gen Tacomas, a 1st gen tundra and a whole heap of mr2s.) but recently got the chance to buy a 1970 land cruiser and I'm in the research phase of this, but here is there details - It runs, it drives, current owner has never taken it out of low gear since buying it years ago, its got a jeep plow on it that the current owner installed and only used on his lil property. the rear of the body is pretty rotten but my first visit to go see it, the frame looked... Read more
By wngrog
I've been right click saving Cruiser pics for years. I'm about to rob this forum for some new pork. Here's what I've gotten to date 55 Series - See and Eat Mississippi
By outlate
***Anyone know why i can upload a video?*** Hi All, I’m having issues with my 2003 LC. I try to start it and it does the click but no start. At first I thought it was the battery because I was able to get it to start by jumping it with my jump box. So I got a new battery. Same problem. I scoured the threads about the most common No Start issue, but as you will see in my video, the security light does go away when I insert the key. I thoroughly cleaned, greased, and tightened the battery... Read more
By Lutz Auto
We have a new option for immobilizer defeats for the 1HD-FTE engine swaps. These are made here at Lutz Auto in the USA and are a great, easy option. https://www.lutzauto.com/product-page/toyota-1hd-fte-immobilizer-defeat-for-engine-swaps
By gbut
Have just replaced the ABS brake booster on an 06 FTE sahara Front and LHR brakes working fine. Have been through Tech Stream's Air Bleeding protocol without success. Where do we go next? Pump cycles normally.
By JimJ
Post a cool photo of a Toyota LC that you think is wacky, wild or just whatever
By fj40z
Posted up a couple picks in 40’s tech and was asked to share here as well. Had the truck for several years now and it has become one of my all time faves. I kept up a build thread for a while over in the ONSC clubhouse section but haven’t updated it in quite some time. Here’s a link and a few current pics @Mike Shull https://forum.ih8mud.com/threads/asian-orange-79-pickup.1159108/ ... Read more
By Goldcountry
I just got a 99 lx470. My climate control doesn't seem to work right. The ac will work if the temperature is set all the way down to cold. If the temperature is set one click up, it wants to put the heat all the way up and direct to to feet. It can be 100 degrees out. Does this sound like the interior temperature sensor? Is there abutting else it could be?
By 95Landy
My coolant is going to another dimension or stolen by my neighbor every night... 95' Land Cruiser FZFE, imported from the middle east. 77k original miles, my daily driver. Engine rebuilt in 2025 to include the head gasket. New radiator, new plumbing. Passes pressure checks, no leaks, combustion checks, oil is oil. No misfires. Cylinders boroscoped and looking minty fresh. No overheating (thermostat gauge works). No white smoke. After a long drive or a few short ones on a full radiator and... Read more
By Andy Thompson
Post your pics, just general arty or deeply exciting pics of 60's. Here's a couple to get you started
By Dumpolina
9/30/2019.... started out replacing a cracked hub dial and now I’m this deep. Scout and the FJ60 are both disappointed. Nice surprise, I thought they were stock birfields
By POPO AGIE
Today I ordered an FJ60 rear axle housing to convert to a full floating axle. After researching what it will take to modify the frame it looked like something that I have the skill set to accomplish since I did my own reverse shackle set up. After weighing the cost of different options to install a used full floating that was quite high to have to replace the shafts. The next option was to buy the kit to convert but would have RCV shafts and was almost as expensive. Then I found out I... Read more

By captainva
Any of y'all see this? a few blocks from where I used to work House explodes in Virginia as police try to execute search warrant for suspect setting off flare gun - WTOP News A house in Arlington, Virginia, exploded Monday night only minutes after police posted on social media about a suspect setting off a flare gun inside a home. wtop.com
By Serp0421
Looking at dobinson 2-2.5 lift on my LC. Are the torsion bars and diff drop necessary?
By Chungas Revenge
The WV Overture. I wandered in off of the 40 section, so you know immediately, that I’m somewhat suspect already. I’m marking my spot here on this forum IOT document a small project that jumped completely right of center early on and never looked back. In the beginning there was a fire pit.

By Devilmans Hand
I'm just looking around and find some interesting stuff a 1999 diesel cruiser being parted out 1999 toyota landcruiser some fjc wheels for $250 Five Used FJ 17" Rims and BFG Tires the other day i saw a free 1986 toyota truck listed for parts in the DC section. I bet someone could use those parts if its real. Damaged truck for parts time to get back to
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.