News, forums and creators

Latest threads

• CivicX·21 days ago

  How is my HID Kit Beam Pattern?

  By CU08

  I just installed a new HID kit for my 21 Civic with OEM halogen projector housings for the low beams. Couldn't find many good "Pattern Pictures" for HID bulbs that aren't blown out or clipping. Same with LED pictures. These pictures are all slightly underexposed to see the pattern better so they don't clip brightness isn't the issue here. I was wondering about the beam pattern output from my current setup, mainly because I got used to a slightly "worse/spread out" beam pattern from some... How is my HID Kit Beam Pattern?

  More Open thread at source

  Save
• RamForum·21 days ago

  2017 SLT Low Beams Dim

  By sbarner

  I bought a 2017 SLT with 66k on the odometer and drove it in the dark for the first time recently. I could barely see the road under the low beams, and a slow-moving porcupine paid the ultimate price for my insufficient lighting. The fog lights seemed brighter than the low beams when I turned them on, though they don't light up the road very far ahead. High beams were bright and high enough, though their beam pattern was narrower than on any other vehicle I've driven in the last 50 years. I... Read more

  More Open thread at source

  Save
• Genesis Owners·21 days ago

  changing rear brakes

  By Tracy M

  we are changing out the rear brakes on a 2015 V6 Genesis sedan today Just wondering if anybody has had any problems doing this job?

  More Open thread at source

  Save
• CorvetteForum·21 days ago

  Transport company recommendations

  By DudeWithAVette

  Anyone have transport company recommendations for a Charlotte, NC to Columbus, OH route? The car can't move under its own power currently and is AWD so it will need a flatbed tow with a winch. ...

  More Open thread at source

  Save
• AudiWorld·21 days ago

  C9 A6 Allroad Auto Start-Stop

  By Mareb

  Hello, I just took delivery of my new Allroad diesel and can't seem to shut off the auto start-stop (only if I put the car in dynamic or the transmission in S mode), which is really frustrating....

  More Open thread at source

  Save
• Genesis Owners·21 days ago

  Just bought 2027 gv70 did not notice the hitch dont want it will give away if you remove it. can u tell me how long to remove it.

  By Golfer10

  Just bought 2027 gv70 did not notice the hitch dont want it will give away if you remove it. can u tell me how long to remove it.

  More Open thread at source

  Save
• ClubLexus·21 days ago

  RR Racing Pulley Set and Ultimate AOS System

  By S200oRBust

  Purchased these part(s) with the intentions of installing on a GSF but never got around to doing-so. I would like to sell everything as a package deal. *Price - $850 shipped Location - FL* ...

  More Open thread at source

  Save
• Honda-Tech·21 days ago

  Wolfbox’s 7th Anniversary | What's In Our Lab?

  By Wolfbox

  Dear friends of Wolfbox, As we gear up to mark our 7th anniversary, we would like to invite you to our labrotory and unveil how we test our products. Check out the video shared with the...

  More Open thread at source

  Save
• ClubLexus·21 days ago

  Wolfbox’s 7th Anniversary | What's In Our Lab?

  By Wolfbox

  Dear friends of Wolfbox, As we gear up to mark our 7th anniversary, we would like to invite you to our labrotory and unveil how we test our products. Check out the video shared with the...

  More Open thread at source

  Save
• Honda-Tech·21 days ago

  Wolfbox’s 7th Anniversary | What's In Our Lab?

  By Wolfbox

  Dear friends of Wolfbox, As we gear up to mark our 7th anniversary, we would like to invite you to our labrotory and unveil how we test our products. Check out the video shared with the...

  More Open thread at source

  Save
• 

  Jaguar Forums·21 days ago

  Hello

  By jinwoo

  I'm a Jaguar F-Type owner from South Korea. I joined this community because I have a lot of questions about my car and sometimes run into challenges with maintenance and repairs. I'm hoping to learn...

  More Open thread at source

  Save
• Ford Truck Enthusiasts·21 days ago

  Wolfbox’s 7th Anniversary | What's In Our Lab?

  By Wolfbox

  Dear friends of Wolfbox, As we gear up to mark our 7th anniversary, we would like to invite you to our labrotory and unveil how we test our products. Check out the video shared with the...

  More Open thread at source

  Save
• Honda-Tech·21 days ago

  2009 Honda Accord P303 code

  By anniqu

  Hello, I have a 2009 Accord with about 220k. The CEL light came on and the code is P303 . I changed all of the coils and plugs and still get the code.

  More Open thread at source

  Save
• Ford Truck Enthusiasts·21 days ago

  Help- 03 Ranger no start after pulling dash aside for heater core install.

  By momercury

  Hi, I put a new heater core in my 03 Ranger and now it wont start. Turns over fine just no fire, everything else works, lights, wipers, dash lights all work. Unhooked battery because I wanted to...

  More Open thread at source

  Save
• Ford Truck Enthusiasts·21 days ago

  1956 pinion grease seal

  By BaxBiron

  Hi all I had a wet mess under the grease pinion seal on my 1956 F600, a simple enough job I thought lol. Propshaft came off easy, I did mark everything up so it all went back in the same place...

  More Open thread at source

  Save
• ClubLexus·21 days ago

  Suspension calibration

  By PianoPaul

  I had the rear height sensor in my RWD LS460 replaced a few months ago. Ever since my ride is somewhat clunky. I asked the shop to do a calibration, but they don't have the software. So I just got...

  More Open thread at source

  Save
• RX7Club·21 days ago

  Chrome & Silver Stock FD Wheels

  By SikFC3S

  I have some stock wheels, 3 silver and 3 chrome fd wheels in good condition. But i only have 3 wheels of each. Got them in a deal. I dont plan to use them So im listing them. Im willing to ship if...

  More Open thread at source

  Save
• IH8MUD·21 days ago

  Question about bearing loads in V35A.

  By dms

  ASSUMING bearing failure in the V35A may be from loads placed on main bearings in high torque situations (I know this does not appear to be a proven hypothesis), what situations create the most load on main and rod bearing? I have to drive up hill in my driveway to get to the house and my V35A sounds like it is working harder between the 1000 to 2000 rpm range than cruising a 85 mph. Luckily, my 24 LX (on recall list) has continued to stay together (65k miles) but I have really started... Read more

  More Open thread at source

  Save
• For A Bodies Only·21 days ago

  Steering wheel swap

  By chessking

  I have a 1965 barracuda I am restoring and I bought a 13 1/2 inch grant wheel to replace original 16 inch wheel is this going to be a problem I don’t have power steering and I have 13 inch wheels

  More Open thread at source

  Save
• Ford Truck Enthusiasts·21 days ago

  1996 F-250 5.8 No Power on Acceleration

  By jeer weezer

  Ok, Here's a quick run down of my problem. Truck no problem starting. Great Idle. Even goes around block smoothly up to 20 MPH. But, as soon as I try to accelerate engine keeps running but bogs...

  More Open thread at source

  Save
• 

  For A Bodies Only·21 days ago

  Newbie

  By MC72

  Thanks for the add. I am a 72 Dart owner as of this morning. Originally a 318 car that is a “Swinger Tribute” now with a 340. Have always wanted a Mopar since my Dad bought me a 72 Mach 1 instead of the 68 Roadrunner I wanted We all have our struggles. 40 years later and I’m in an A Body! Will leave it alone for awhile but will be looking to add disc brakes, headers, and probably a motor build. Will keep my mouth mostly shut and try to soak up some of the knowledge here as I... Read more

  More Open thread at source

  Save
• Genesis Owners·21 days ago

  Cannot connect to Connected Services (option missing from the menu)

  By pmndaniel

  Hey everyone, Never thought the issue I have is going to be such a big deal, but here we are. Sadly, there's no Genesis dealerships in my country and Hyundai won't help, so I'm relying on the community, maybe someone can point me in the right direction. Long story short: I own a used GV80 (manufactured in 2021), imported from Germany through a local dealership (not specialized in Genesis cars) and I love it. The car's been used in the Czech Republic before (bought as new), so it's a... Read more

  More Open thread at source

  Save
• SVTPerformance·21 days ago

  What is the preferred VPN program of choice?

  By rborden

  What VPN's do you guys use and prefer/recommend?

  More Open thread at source

  Save
• 

  For B Bodies Only·21 days ago

  1964 big block 4 barrel thermostat choke assembly

  By Richard Cranium

  I believe it may be the same through 1966. Need the clip that attaches to the carb also. Thanks!

  More Open thread at source

  Save