Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By duster 2
I have a set of Harland Sharp roller rockers on a 340...just wondering if anyone has replaced the ball adjuster screws with cup adjuster screws.If so was oiling pushrods used? also have hydraulic roller lifters Thanks.
By mdim
So I've got a '71 FJ40 that was already converted to disc brakes years ago with an aftermarket kit. So still running the stock outer axle setup. I'd love to get rid of the course spline outers and old Warn barrel hubs. Will a set of early mini truck outer axles and hubs bolt up by themselves? Or will they not work with the FJ40 knuckles? I can certainly swap the whole outer assembly if needed but then I need to find some (and I've already got discs that work great). The shafts themselves I... Read more
By SHIfTHEAD
I'm trying to determine if the whine I'm hearing is normal or if it's 'now that I've heard it I listen for it all the time' kinda thing. The whine is only noticeable above about 50 mph, but is most annoying at about 70 mph. On really long trips it starts to drive me a bit crazy at the higher speeds, but I think that's largely because of funky harmonics in the cabin. It's got 193K on it and I've fairly recently changed the oil in it to see if that would help. No chunks came out and it was... Read more
By rmchrgr
A couple years ago my trusty old Ryobi battery drill driver gave out after many years of service. I'm finally over mourning it's demise and it's time to go get a new one. Have it narrowed down to the Milwaukee M12 vs. M18. Don't need an impact driver, just the drill. I'm leaning towards the M12 because it's smaller/lighter but I'm not sure if it's powerful enough. I know the M18 has a brushless motor version that's lighter but it's way more expensive than the regular one. It doesn't need to... Read more
By Merlin
2025 Mazda CX-5 Machine Gray Metallic CQUARTZ Finest Reserve Ceramic Coating A Miracle Detailing Inspection: DeFelsko PosiTest DFT Paint Thickness Gauge for ferrous/non-ferrous metals DeFelsko 200C3-G PosiTector 200 C3 Advanced Ultrasonic Coating Thickness Gauge Lighting: ScanGrip MultiMatch 8 and MultiMatch 3 color from 2500k to 6500k. ScanGrip Sunmatch 3 Machines: RUPES Bigfoot iBrid Nano Long Neck RUPES BigFoot HLR 75E... Read more
By Bryson09215
I have a 2007 ES350 and I moved the sun shade forward while the moonroof glass was open. It is not supposed to move that way, and now the glass is stuck open. When I attempt to close it, it gets...
By Merlin
2026 Ford F-150 Platinum - Gloss Black CQUARTZ Finest Reserve Ceramic Coating A Miracle Detailing Inspection: DeFelsko PosiTest DFT Paint Thickness Gauge for ferrous/non-ferrous metals DeFelsko 200C3-G PosiTector 200 C3 Advanced Ultrasonic Coating Thickness Gauge Lighting: ScanGrip MultiMatch 8 and MultiMatch 3 color from 2500k to 6500k. ScanGrip Sunmatch 3 Machines: RUPES Bigfoot iBrid Nano Long Neck RUPES BigFoot HLR 75E... Read more
By GTB/ZR-1
Had these on my 4RS. Trying the resonated version (getting old lol). These are the max HP version. I just put the non-Res on my car and frankly, these are not much louder. So not sure if juice was...
By Kamilo77
I ordered replacement rear Bilsteins from Roger. The spring perch’s are about 1/2” narrower than the factories. The full spring doesnt seat inside as needed. Anyone else run into this? Just checked...
By thenative1
Morning all! My first time posting in the 80 Series section. Have lots of wrench time on an ‘84 FJ45 Troopy and an ‘89 FJ62 but just starting the journey on a new - to me - 3x locked ‘97 FZJ80 (below). Lots for me to fiddle on/improve and on delivery, found the low-beam bulbs were dead so replaced them and in replacing the driver’s side, while fussing with the headlight housing, the grommet below seemed to drop out of nowhere. Looked hard for where it might have come from and examined the... Read more
By mikemm
Q7 intermittent struggles to start Looking for some advice from anyone who’s experienced a similar starting problem with an Audi Q7 3.0 TDI. Vehicle: 2014 Audi Q7 3.0 TDI, 180kW. The engine...
By retiredin93
I have a 2019 F250 and cannot get the brake controller to adjust to a higher gain. It was set on 2, but would not go up, I pressed the - button and it went to 0 and wouldn't go back up. Any ideas of...
By ModInJapan
Hi folks, Mod in Japan here. Putting an intake option for Lexus RC F owners in front of you, available from us now. Image: ...
By MrTrim
Well, if you’ve been following along with my project 67’, you know the previous owner is still searching for all the original parts removed when he built the car into a street racer. Up to this point...
By John1c
Hey Fellas, please recommend a shop in OC that can solve my AHC issue. The suspension sometimes go really stiff without me changing the comfort level. Thanks.
By Agent_York
Hey all! I'm looking into buying a C8 corvette but im concerned about parking. I live in an apartment. I have underground parking but the lot can be seen a little bit from the garage opening but the...
By 440 sixpack
Has anyone done the wiper blade recall? do they give you new blades or just look it over and tell you to get lost? Both my'22's are on it, but neither have a problem. they're ready for new...
By GTB/ZR-1
15mm Numeric Racing 5x130 spacers with extended bolts - $115 shipped. I used these on my GT4 to run different offset HREs. Threads all perfect, no issues.
By steveP911
Had our season ending DE for PCA Potomac at Summit Point this past weekend. Friday was volunteer day, with five sessions of 30 minutes each! Pays to volunteer! I will continue to say that I feel this...
By derk87
I bought my first 2009 lx over the weekend. Spent the past two days going over it and getting it inspected and everything is great and clean on it. Went over the whole interior and made sure everything worked. When I tested it the 4Lo didn’t engage but managed to get it to activate randomly trying it again. I was worried there would be steering or suspension issues since it sat with little driving the past 6 months but at the inspection everything checked out good. The frame... Read more
By Floydy
Decided to replace the scratched and chipped windshield on my 72 coupe. Popped the old one out without too much difficulty and starting to think through the plan to install the new one. I'm...
By johnnymat
900 mile Roadrunner road trip! 1970 RM21 project let the fun begin couldn’t be happier! Found an honest seller now officially in the club. Came with a drive train t5 440, 833 and 8/34 no idea of the ratio…hopefully get it running and mobile is the plan. Someone replaced both rear quarters, trunk pan, outer wheel houses floors, very solid not the finest work but… He gave me AMD bucket seat braces not sure how they go in and I will need seat risers has non matching Upholstery buck seats... Read more
By mikewelsh75
Brand new off the lot 2025 Laramie, Hurricane v6, 5,500 miles. Highway use only. Turned corner and... this... anyone else have catastrophic suspension issues and where do we go from here?
By jshelton7199
Many of you will recognize me from the last couple months trying to fix this problem. I've been through many many fuel pumps and none have seemed to fix the issue. This is what I did for anyone who's...
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
