8" hump
By Rubiranch
Isn't that the 4 speed trans trucks? '77 F-150 4wd auto short hump? I have a bad memory. :confused:
Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By Rubiranch
Isn't that the 4 speed trans trucks? '77 F-150 4wd auto short hump? I have a bad memory. :confused:

By F350GUY1997
I have a 2000 F-350 Super Duty 4x4 with an excellent running 7.3L Power Stroke that's getting pretty rusty and at the end of its life cycle in the northeastern climate. Yesterday I pulled the...

By hotvet67
The oil sample only has 1,670 miles on it , but 3 years since I changed it , truck has 74,696 / 2207.3 hours comments welcome , MotoStu made a post 9/12 on a low mile oil report so I thought I would...

By Redmanbob
First time in this forum group, always been an FE powered guy. However recently decided I wanted to get a project "Rat Rod" and an odd one came along. Purchased a chassis advertised as a 1941 3/4 ton...
By Si Hi
Morning all, after sitting for 2.5 months and trying to get my transmission up and going, my 95 F-150 351w has developed dead cylinders. Verified by spray bottle method that cylinders 6-7 were not...

By Charlie98
Both my daughter and I have seat covers on our rear seats... me and my 2023 SD, and her with her Subaru. They are both reasonable quality, but are nylon and sort of slick... add that to the rear...
By Stonebacon69399
Hey ive got a NP203 in my truck and it keeps popping out of 4wd (it has a part time kit) and I think I want to put a NP205 to replace it. I looked under another truck of mine and I think the NP205...
By cdaddydiesel
2024 F250 Powerstroke. I know it’s a common issue with these trucks but hoping for some direction before heading back to the dealer. having the issue where it blows cold and then randomly it will...
By saauvenshine
Installed kingpins in my 1954 today after getting bushings reamed at machine shop. Got pins lined up with notch in pin in correct position. When installing the keeper tapered bolts through the holes...
By columbia1spring
Members, I have a 65 ford f 100 4.9 inline 6. Triple on water pump, double on crank and alt My question is simple, are there any aluminum or chrome aftermarket pulleys i can just bolt on and go?

By F150_4x4
Months ago I changed the lower rad hose and there was a noticable leak on installation of aftermarket rad hose and the tech made the readjustments and it stopped leaking. Today after an hour's drive...
By tricountytrail
2020 F350 limited with led headlight? No Halo (DRL) on one side and no High Beam only low power on same side. I am replacing headlight Ford LC3Z-13008-L and ballast (HCZ-13C788-L with used pieces,...
By FishOnOne
Class action... I suspect Ford's legal department is going to be busy. Judge OKs class action lawsuit against Ford for faulty fuel pumps (msn.com)...
By StockHeightIsBest
WTT the pictured DRW grill from my 2024 for any suitable 5th gen grille. Cannot be XL, XLT or any grille with two center horizontal trim lines. Must have the "S" bends on the sides. Color is...

By sj9809
Help, iam stranded with my family and Camper. my return fuel line bursted, We removed the old line without issues, when I tried to screw on the new fuel line the nipple/fitting on the engine block...

By zberg98
so i have this diode in my truck that needs replaced, i’ve looked everywhere and can’t find a replacement. all it says is diode nothing else Image:
By nova801428
I'm thinking about buying a 2000-2010 F350 with a v10 to tow my 8k lb camp trailer. I've been looking on and off and I'm curious which truck would you choose to buy? I've had a 2v v10 in an RV that...
By DHWill52
New to the forum. I recently bought a 1946 Ford 1/2 ton pick up. The horn button popps off every time I blow the horn. Any way to prevent that? Also, when the horn blows, it sounds "clogged" up. Any...
By pbauer
I borrowed my brother's FORscan to update the speedo on my 2022 F250 after a tire change. Any other cool things guys do while I have it still? Any way I can update so the front camera comes...

By Olboy
Image: I’ve owned this M100 since 1999 it’s been moved with me hundreds of miles over the years and I’ve realized I’m not going to get to it and I’m not getting any younger. It is going to a...
By beartracks
I'm trying to figure out if I have the wrong vacuum switch. 1977 F100. Air comes out the wrong vents. 73-77 uses D5TZ-13B888-A, 78-79 uses D8YZ-19B888-A.. There were quite a few little changes mid...
By 4by4ord
I just bought a '27.F350 crew cab long box and want to add bags and an onboard compressor to handle a little more payload. Much of the time I run empty and so I want the ability to adjust air...

By Goozzman
Hi guys (and gals), I'm rebuilding the Thompson power steering pump from my Ford F-250 from 1973. I guess I messed up a little, because I forgot what side up one of the pieces should go. Could...
By MDHunter
Looking to replace the carpet in my 2000 f 250 crew cab, any recommendations? Mike
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.