Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By Jim-68-BMPSDE
My heater core is leaking, so i want to temporally bypass it to R&R the core and go through the entire heater box. It appears on my 68 F100 with a FE 360, a previous owner has swapped out the...
By rklewis1005
70 Charger Good evening. I've seen lots of posts around gas pedal postion relative to the carpet pad, but what about relative to the roller? Where should the roller thats on the assembly on the firewall rest against the pedal? Side to side and from the top (molded bumps on back of pedal)? Pictures would help a lot. Thanks Ross
By ax0n
2026 Sequoia w/ Dobinsons MRR lifted about 2.25" above stock I have a noise that sounds like a metal component unloading or un-binding. I can occasionally hear it in the cab with windows up but don't feel it in the steering wheel. It happens when I turn the wheels close to full lock, even when sitting still - but not all the time. Especially frequent when I am maneuvering out of a driveway or parking lot - and more likely if the wheels are turned near full lock. It also happens when I... Read more
By Super77
Building on this thread , which describes a similar issue but no clear resolution. My sunroof has worked perfectly up to today. I exercise it at least once a month: open/close/tilt, and blow debris out of the nooks and crannies, clear the drains annually. Never lubed it, though. But no issues. Today I noticed the motor was really straining to get it open and closed, and ultimately, I could not get it to tilt back down and closed. I removed the glass panel. When I hit the tilt-down... Read more
By TRDdrew
Hey guys and gals, after almost 4 years of ownership i figured it's finally time to start a build thread on it. My wife and I decided that we wanted a capable SUV to keep relatively stock ( we all know how that goes ...) for family duties and light wheeling and camping trips, so hence the title suggests the search began, as we had settled on the 100 series platform. We had been in the market for about 4-5 months when @BlueCruiser84 posted this one on MUD. We drove down to see it... Read more
By 01yellercobra
I'm thinking about moving my battery to the spare tire well. I don't run a spare tire so I won't be missing that. I don't have anything to measure at the moment. But would anyone know if there's a battery that could fit in the spare tire well? I was thinking of going with something like the Anti Gravity when things go back together. I don't sit there with the radio on for hours. Worse case I might have the key on while making tweaks to the tune, but none of the pumps run with the engine off.
By chrger1967
I took the caliper and the rotor off and its making the same noise. There are supposedly new green bearings installed when the rear disc brake kit was put in. I'm thinking it was done wrong. I did check the fluid in the rear last year and it did wet my pinky when I stuck it in. Its making the noise on both sides, it sounds like it anyway.
By BillBax fj60
Hello all, I did not see a threat about this so here it goes. I am trying to cad the fj60 dimensions for a replacement D Pillar vent so I can 3d print a new one. I am away from my cruiser right now and I cannot measure. I am having trouble finding the dimensions. just wondering if anyone knows them? I looked in the parts catalog but it does not say. Thanks, William
By Thumper996
[img alt="Jcw duffle bag new with tags "]https://cimg1.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/2000x926/20260926_164837_72ea2d72dd27025150ae7bf5b274b5b0c3ee5b84.jpg[/img] Jcw duffle...
By roberts427
besides Andy C where have people had good luck getting there 63 caps restored.. thanks
By jtstretch
New to the FJ world. And first post. Recently acquired a 72 that has already been SBC and 4spd swapped. I’m wanting to put in a DBC LM7. From what I am reading most of the work and adapting is already done. Anyone have experience with this? A possible throw-out bearing and clutch arm change. Thicker pressure plate. Any other major things I should be aware of? Appreciate your input.
By 69Chrgr
Just a comparison video if you're considering a later model power plant vs. a traditional small block. Prices, and things to consider.
By MikeRP
Hi, just looking for a couple of pointers before I start removing parts I don't need to. I have a short on the boot wiring loom which is causing the boot up open on it's own. Due to a past water...
By ProTouringCuda
I would be interested to know what others have done about the heater core ports on the 5.7L G3 Hemi water pump. Did you plug them? Did you use the hard lines and just connect them together? I would like a clean look, and am thinking of turning down some aluminum rod and just plugging them. Thoughts?
By DamageXYZ39
Hey there, I have been messing around with AlfaOBD in my 2014 1500 Express to get the SRT pages/Performance Pages to work. I followed a tutorial from here ( https://www.ramforum.com/threads/enabling-performance-pages.204447 ) and it somewhat works. You change your vehicle line to a LD-Charger, reset your radio, get the Drive mode app, then change to a ZD-Viper for the SRT Pages, then back to your original ram model (DS-Ram1500). This completely works till you let your truck sit after... Read more
By PDoyle
For anyone who has interest...... A Toguardo screen for $60. https://www.amazon.com/gp/product/B0HB59LRNF?tag=ihco-20
By FishTown
Yokohama has been offering a UTV/SXS version of the Geolandar MT G003 in some sizes that are very interesting. I've done a little bit of reading and it sounds like Jxxp and Ford Ranger people have been running SXS tires in an offroad capacity, but I'm interested to see what people here think of these specific tires as an option for FJ60's. It doesn't sound like they are DOT-approved, but I did find one website that they are on their spec sheet. Comparing them to modern LT tires it seems... Read more
By DumpsterFire
a month ago hughes said they should be back in stock in a week. Well past that now so I'm just looking for the best alternative to the magnum valve spring kit they sell
By budw67cuda
Figured I better finally start my restoration thread. I bought this car in August 2023 in Topeka KS. The day we brought it home it was 107 degrees. Crazy hot but we managed to get it back to my garage. The car was taken apart for restoration in 1978, I believe, just never finished. The owner had passed away and the wife sold it to me with the promise that I would finish it and give her a ride someday. We gathered up the pieces of the car that were scattered across 3 different buildings... Read more
By CharlieS
Hi, Somewhere along the way I lost both of my plastic caps for the H and L ports. It's a 94 with R134A. Are AC caps generic - or maybe a better way to put it is do generic AC caps fit as replacements? If not, what's the go to source for replacements? Thanks!
By ZoraD
Howdy All! Just joined the forum, making my intro post! Proud owner of a ‘68 427/435hp coupe - currently disassembled, but on the way back. Image:
By LWC
I had read on the tundra forums that people were seeing quite a bit of debris/swarf in the differential gear oil following break in, so i wanted to do an early change (20k miles) to hopefully avoid issues down the road with the lockers. i've done a fair amount of off roading, albeit in relatively cool temperatures. While i was there i also did a trans fluid exchange, transfer case and greased the zerks. Was pleasantly surprised by the wear metals in the diff, none of the swarf that people... Read more
By Msmith3054
69 Dart Swinger bought new in 69, sold in 73 when I joined the Navy, found in somebodies back yard where it was sitting for 12 years after his dad passed, bought it back and did a full rotisserie nut/bolt/screw/washer restoration. Just brought home from paint booth Friday, been installing chrome and trim since. Woo-Hoo!! I’ll get better pictures once I can get it outside in the sun. Gotta finish my truck brakes first. ... Read more
By Martyt56
I recently did a cam and lifter swap plus headers in my 2019 Bighorn 5.7. I took it to my tuner and it runs awesome but it will randomly lose window controls, door locks, fuel gauge , amp gauge, AC, radio, all lights this is random and it corrects itself in a few minutes.It flashes No CAN BUS when this happens. My tuner is stumped and has ordered a BCM for the truck and he stated if that isnt it he was changing the TIPN. Any one have any help for me as throwing parts at this thin is expensive.
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
