Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By alaboudi
Hi Everybody,I have a *2014 Lexus LS460* with a problem in the *driver's power-seat cushion-length/thigh-support (leg-support) adjustment*. *Symptoms:* * The thigh-support mechanism still...
By In2cruisers
Have read a bunch of threads on booster upgrades... I have and have had a booster from a 1982 toyota 4X4 and spacer for many years....well its that time... this is for my 66 Fj45 that now has a 2f from a 60.... I have read that there are issues with spacer and 2F clearances...The body rib has been trimmed by a PO.. but was still planning to use the spacer to avoid trimming it to the firewall...So it I use the spacer and mini truck booster... is there a prefered master to use?? There were a... Read more
By caseydog32
I've been a member for quite a while, but not active. My first Audi was an Audi A4 1.8T with an APR ECU, followed by an A4 3.0 with a six-speed manual (you don't see a lot of those), followed by an...
By lt403
Hi everyone, Are dash bulbs still available for an 06 GX? Asking for a friend Thanks
By Your mama
Hi, Is there someone we trust that I could send my laptop to and have xentry and or whatever is necessary for Diagnostic.If it makes a difference .I will only be needing it for these two vehicles. ....
By earth_00
Hi, I’m diagnosing a 2010 MY Porsche Panamera 970 4.8 V8 NA with PIWIS 3. The engine developed a rough/hunting idle quite suddenly. Above roughly 900–950 rpm it becomes completely smooth and it...
By RuggedBuilds
Check out this little video I made. I just blasted across the US and I'll be posting a video of that shortly, in the meantime, here is the into. https://youtu.be/ehLyhbCzNKg?is=PWnVAtM1OimPjY3Y
By 750machiv
Dears, Funny problem this time: a 997.1 not recognized by a piwis 3 (42.200) + tabscan T6PT3G. Connection is ok, but impossible to extract a VAL! error message is (translated from French): "this...
By einehund
So after 16 years, The Angry Smurf turned 100 so I thought she needed a birthday present! A Ford Performance 1 piece aluminum driveshaft that was needed due to what I thought was a failing carrier bearing... that wasn't the issue, but oh well.
By Sajan
Need to add another car to the household.. I like '18 LX570 but it's got some mods on it...wanted to pick up one that's stock. Dumb idea to pick up a 13-15? Haven't had two of the same car other than when I picked up a 2000 and 2004 camry. (don't shoot me) but I also thought about going back to an EV like a F150 lightning.
By UncaModelSol
I've been fighting a start issue for months. At first, it was intermittent, but now I get nothing at start position. Full dash lights, etc. I can push start it easily. I bypassed the clutch safety...
By JozefJ
Hi all, Lately I have had an oil leak between the engine (1985 318) and the transmission (A904) of my Dart Sport. After a drive of about 20 kilometers (yes, Europe..), the engine seems to lose about one litre (yes, Europe..) of oil. The oil seems to gather at the top of the back of the engine, an then drip down the side of the bellhousing. The inside of the bellhousing is dry: no oil splatter on the converter or flexplate. So I guess I can rule out the rear main seal. I have started to... Read more
By Ascari_Blue_A5
Will be replacing the 19" on my A5 (they will go to the A4) with 20" Audi OEM wheels. The "suggested" tire size is 265/30/20. Can I pull off a 35 or even a 40, or would they rub? Alternatively, I've...
By iamkamalsingh
I recently got a 2015 IS250 AWD V6 with the inside edges of the rear tires completely gone. After alot of online research, I bought adjustable rear upper control arms (Camber Kit), put on new tires,...
By OreCruisinUJZ100
Hello everyone, I've been making good progress on a 2000 Land Cruiser I picked up back in May and I thought everything was going good until yesterday when it died on me while running errands. The battery light indicator turned on, ABS light, the stereo kept turning off and on and the engine began to lose power. I was able to drive it safely off the road and into a parking lot. While doing some basic diagnostics, I found that I'm missing at least 2 of the fuses that are supposed to be in this... Read more
By SoCalledFriend
If so, how do I access them? T.I.A.
By Debsmerc
Hi all. I'm really having trouble finding a BCM for my 2007 C6. It's even worse that I'm in New Zealand and find parts really hard to source. I have heard there are BCM that are compatable. Does...
By Stew Baily
Dumb question. Is there plugs or ferrels that are supposed to be installed in the rear hard top mounting holes when the hard top isn’t installed similar to the chrome ferrels used on the side...
By jimmy1230
Hi I have a RJ70 1990 I will do an upgrade from the original G40 that comes mated to the split case to a R151F, I already have the connection to the new motor figured out, the part that I'm still not sure is the bind to the TCase, I bought the following piece: 33030-6A413 also I the adapter that goes to the TCASE (36211-60090), but what I don't know if this transmission will fit, transmission is on it's way now I don't have it with me yet. This is the under of the RJ70... Read more
By dantheman
Hello, i have been having this problem for a while now, every time i hit a bump my passenger side buckles or makes a huge clunking noise and it sounds and feels horrible. I posted a video attached, not a good one but the first bump you can hear it. I am not sure what it is and yes i am lowered and i also replace my shocks multiple times so its not that, i retorqued all the strut assembly, like top mount, and bottom mount, and i cannot find out what it is. As a test, i also took my tie rods... Clunking/Banging noise on passenger side
By cdub982
Hello, I'm Chris, recently joined. I've had a 2022 718 Cayman GTS 4.0 since early 2025 and recently picked up a 2016 991.1 Carrera S. I've learned a ton on several other forums so adding another one...
By Dragonsteel
I've spent the last month going thru the cooling system on the 71' BB Dart. 383 with 440 source Stealth heads, TTi Headers. It started this summer with running temps climbing up to 220 at times (which the car had never done before). I was running a 440 source hi-flow pump with a 180 stat and 22" 2 row Northern Radiator with a 15" flex fan in a shroud and a 14" Maradyne pusher fan for traffic situations. Did some cleaning on rad with the air compressor and found that a couple rows were... Read more
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
