Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By Street Rat
These are reproductions that are in great shape. The front turn signal lights and grilles are factory pieces Front side marker lens with cornering light - Both for $150 Rear side marker lens -...
By miknoypinoy
I’ve searched a lot of threads here and found some info. I’m particularly wanting to know if my knock control values are ok in my 2020 civic sport 2.0 NA. I’ll post a data log later but just want preliminary responses based off the info I can give. Knock values are in .7-.9 occasionally over 1.0. I drive in S mode with paddle shifters on the streets. D mode on the freeway. Nothing too aggressive. Normally won’t pass 4k rpms that much. 2020 civic sport 2.0 Na engine. CVT... Another knock control question.
By djc6
My 2018 A4 had the Motion for Audi connect retrofit installed on March 10, 2022, after the original 3G service was discontinued. The Mojio device is powered through the OBD-II connector. I...
By mandynyc
This 2023 Porsche Panamera 4S was specified with approximately $26k of factory options including 21″ Exclusive Design wheels, SportDesign side skirts, a head-up display, Porsche InnoDrive with...
By calrobb2000
hi what size should the master cyl. bore be with power disc front , rear drum be ? was there ever a 3 inch piston for the front disc ? thank you !
By JerseyMike43
Looking for a used 2012-2018 Porsche 911 (991.1/991.2) Cabriolet, PDK only, no Turbos (budget). Hopefully with mileage well under 100,000 and depending on mileage, I'm hoping that there are...
By thoyer
Bought a repop shifter linkage set for 64-67 Muncie. the 1-2 rod fits, the reverse is a little off and had to tweek it a bit to fit, but the 3-4 rod is way off. Thought maybe this rod was for a 63...
By f4 plt
Picked up a 2014. Cayman was stick several months ago extremely happy with the car the fifth came and I’ve owned including a GT four but the title of this thread says it all how many people have a...
By Luismejia
Does anyone have there 2006 under hood liner for sale with the lamp and wires? Please let me know !
By Retarius
Bought a 2027 GV70 2.5 Sport Prestige last Friday, and couldn't be more pleased. I researched and drove EVERYTHING remotely comparable in the past year and kept coming back to Genesis. I really wanted to like the X3 - a great driver - but found the interior appointments and ergonomics to be wanting/weird. For me, the 2.5 SP was the ideal balance of sport and luxury. Furiously reading the user's manual to get ready for a driving trip to Vegas next week. Interested to see what the newer gen... Read more
By sderman
Some thoughtful person damaged our front right bumper (picture attached) on our 2020 UL ES350 and forgot to leave a note. I'm wondering whether the two "dents" could be popped out with heat....
By Nowhere Man
Anyone install the new vette master repro frames. So how do they fit.
By Mr. Brown
Hi, I can't get my manifold pressure above about 170 kPa (0.7 bar of boost). That is just above the advertised wastegate spring pressure of 0.6 bar. I reach 155 kPa fairly quickly. From 155 to 170 kPa takes much longer and the curve flattens out. Then it stays capped at 170 kPa. I don't know if that is normal. My setup is a B230FK with a 16T, a 3 inch exhaust, a KL intercooler, stock CBV, and Megasquirt engine management with a boost solenoid. Changing the boost duty table between 0% and... Read more
By poopsleeve
Searched first 4 pages, didnt see anything related. Park sensor service light came on. Changed all rear sensors. In drive my parking light lamp is on. Once I put the truck in reverse, light goes out , EVERYTHING works as it should. Indicator lights , beeps , perfect. Put truck in drive i get service Park sesor lamp message and light back on. To be fair I haven't chased this problem for a few months I had alot of service / maintenance were higher priority. 2015 6.7 2500 178k on the clock... Read more
By Mopar_Mike
I have an 18 spline 67 A833 4-speed in my 67 GTX that has 30 splines on the output shaft. I also have what I thought was the original Slip yoke that is 29/30 splines. The Yoke will not slide on? I tested it on a 67 727 I have and it it fits fine. What am I missing? I thought they were supposed to be the same, or at least slide on any ways. Everywhere I am reading says it should also at least slide on. Help Please..
By SHIFTYBUSINESS
Just wondering who or if anyone here has a S650? I'm looking to get a new daily between now and the end of the year and the S650 has grown on me, just curious what people think after ownership.
By thomaschebert
Hi fellas, I have 79 corvette that I’m restoring at the moment and I really want to do the l88 flares. What wheel specs do I need because I tried ai and literally every single ai has given me...
By k_harley
Brand new IMS upgrade kit, bought for customer but realized he had upgraded IMS bearing once I pulled his transmission. Opened the box but never used it. Can also install this at my shop...
By skuppy069
Over the last few weeks I was working on adding rear park assist to my 2018 ram 1500 I used all oem parts except for the harness I made to go from the park assist module to the rear of the truck . I used Alfa obd and Mgrimm bcm id details from the Alfa ond diy and I now have oem rear park assist . I will post the parts I used to get the job done . It ended up being a expensive project in my eyes . So the parts are as follows Bezel for the bumpers needed four of them . Part no ... Read more
By RaleighSS
I have a MPVI4 from HP Tuners and was looking to rent it out ..... Not sure if this would be allowed on this site but was thinking about that since it just sits in my garage. I could include a...
By Stephanefrance
Hello. After my RX-7 sat idle for a very long time, the mileage no longer shows up on the odometer, and the coolant level warning buzzer has stopped working as well. I disassembled the unit and...
By BryanStein
OK, I'm sure this group can answer some questions. You always have. The best group on the internet. 2004, F250, 304k miles on the truck, about 250k on the motor and turbo. I've noticed a...
By Bmarcinczyk14
I notice sometimes when accelerating normally from a complete stop I feel some engine vibration in the cabin that goes away very quickly, maybe lasts a half second or so. Sometimes I can even see it...
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
