Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By qkcuda
Has anyone ever dropped the engine trans combo out of the bottom of the car using a four post hoist? Could you build a cradle and lower it down onto the cradle, then pull the k frame bolts and raise the hoist?
By bobj49f2
As a self confessed enabler I was wondering is this a good thing or bad? 🤔 One of the employees of a customer, a person slightly younger than me and never had a vintage truck showed some interest...
By Twfish
Hello all, first time poster long time lurker. Getting ready to do the upgrade from a 5 inch to 12 inch and I’m looking for what all settings I need to change with Alfa. Most everything has been from going from 8.4 to 12 but almost nothing about 5 to 12. It looks like for sure I need to change ICS and DCSD but I’ve seen different things for the HVAC. Will I need too change something for dual climate zone or anything else? Thanks in advanced.
By dharris45
This is a freshly restored rag joint for a 1968 or Early 1969. Price including shipping is $300. Thanks, Don Image: Image: Image: Image:
By serendib
Michelin Sport Cup 2R ZP Tires. DOT 02/2026 and 08/2026. 275/30-20 and 345/25-21 2027 ZR1 was delivered to our home on 9/24 by Intercity Lines enclosed carrier from MacMulkin. Tires were taken off...
By rgs4x
One year only 1958 f100 hood emblem set with 2 spears and hood crest As you probably know the F100 part of the spear is almost always missing which makes this a rare find. Now for the disclosure....
By toddalin
Many here will remember that last year I sold my '64 Resto-mod to a gent in Memphis for $67,500. He had it transported from California. Image: He had the car for about 7 months and passed...
By yfCN4o9XvF51
I just installed a roadtop aa/ac module on a 2018 GS350 with the Mark Levinson system. Now I have lower volume when playing media and a slight feedback whine that changes pitch with speed. However...
By wjnjr
14" leather steering wheel - real leather, not PU, PVC, vinyl, ABS - with gray stitching and TDC stripe. Approx 65mm dish. Comes with a MOMO v2.0 Quick Release, #177h hub adapter for C6, installation...
By Luca Paindelli
I have a stupid vacuum leak somewhere triggering the cooling system failure in the dash... It's already hard as it is to track them so I was wondering if by any chance someone has a diagram of...
By SRBCitrusCobra17
This is not a new issue, but I have been curious about the source of the noise. I hear a clunk from underneath the car when I back it out of the garage, sometimes hear it when I turn a corner, and when I switch from forward to reverse. It is hard to tell whether it is from the front or the rear. This has existed for years, before and after engine removal where the K was dropped. My thought was in the suspension areas. I have looked at IRS mounts, front suspension etc. Nothing obvious... Read more
By Clackavosticus
I am just about to embark on an approx 2000 KM round trip from Queanbeyan NSW to Tanunda SA return after having my coils and plugs changed to NGK branded coils and plugs. Wish me luck for a fault...
By wjnjr
14" leather steering wheel - real leather, not PU, PVC, vinyl, ABS - with gray stitching and TDC stripe. Approx 65mm dish. Comes with a MOMO v2.0 Quick Release, #177h hub adapter for C6, installation...
By commok
So my new to me 1987 Targa has a new pump in place between the battery and the condenser blower, but it is not attached to the body, just free ranging it. What size bolts are used to mount it to the...
By alsfarms
I am in need of a fin top plenum to incorporate with my current FI build. I will have a nice smooth top plenum with a tag calling for a 1962 hi HP application to trade. I will also have a 1962 FI...
By sundevil25
Looking for the pair. Please pm thanks
By RacerMike50
I'm a new member and I've only owned Porches since 2024. My 1st was a 2025 GT3 RS and now I have a 2027 Turbo S coupe being built. I was my Dealer's 1st 2027 Turbo S allocation and it reached...
By EvanA
Hello all, I recently had my E-ray repurchased by GM through the lemon law. i Have a few items I purchased for it that I never got the chance to install and I’m now getting rid of as a result. ...
By Dano76
My 79 F150, 351M, 4sp, everything stock, vapor locked on Sunday in about 70 degree weather on a sunny day. Its the first time its ever happened in the 4 years I've owned it. Luckily i had a friend...
By LandesEnd
Hello --- New member here, but not new to Porsche. Ive previously had a 2006 C4S which was traded in back in about 2022. Couldn't stay away and now have a new 2026 911 S Coupe - Ice Grey...
By Floyd
Very rare and original lighted Plymouth double sided sign in working condition. The brass-plated sign box has light corrosion. Both sign faces are in very good condition with excellent color and only minor flaws (no cracks). Sign faces can be rotated based on preference for display (table-top or wall mount). Sign faces measure 10.5” X 10.5” and it stands 12” tall. $650 plus shipping from MD. Delivery to MCACN is also an option. Thanks for the ad! ... Read more
By Casper Egypt
Highly desirable Boxster S, Manual, Red/Tan. Shows extremely well. Good title, never wrecked. Exterior is excellent with only a couple of small scratches. Garage kept. New top with glass rear...
By walker3
did you disengage the V4 option so that the car is always in V8 mode? if so, how is it doing - how did your gas millage change? if not why?
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
