Every item links back to where it was published. Follow the sources you trust to build your own front page.
Threads shown here are headlines only. Reading and replying happens at the original forum, under its rules.
By Dav2ison
Ok, after fully charging the battery and driving about 30 miles. I noticed the radio and cigarette lighter stayed powered after ignition key removal. This something new. I lubed the ignition...
By Kern Dog
I’m working on this car… The original heater/defroster/Air Conditioning in the car needs a complete rebuild. I plan to sell the car and figure that the next owner may not want factory A/C since aftermarket setups are more compact and work quite well. Maybe if the buyer is like me, A/C isn’t that important. I have a few standard heater/defroster units here from cars that I have parted out. I’m tempted to pull the HVAC unit from this car and swap in a basic, functional... Read more
By tone33
I have a 2007 LX470 - looks like the valve for the low pressure side is bad. I tried switching out the valve core, but it still leaks. I have verified leaking by connecting high side (system is open), and leaving low side off. I run the vacuum pump and can feel suction on the low side. Same result if i pull vacuum with everything connected - as soon as I close the low side valve, then pop off the quick connect, it loses vacuum (hisses). Is there an adapter available I can use to fix this... Read more
By GTX JOHN
Well, today in Bakersfield we acquired 75th Anniversaries in E/SA in my son's 71 Demon 340 and O/SA in our Aspen 318 Wagon. I was able to get by Loge/Stein's race car in the final who does machine work for us. They also build engines for a number of guys on this site. For years their car was probably the fastest O/SA racer around out here. The have a full machine shop and Dyno facility. Plus, they are experts on Mopar Performance/General Racing and one of the very best shops on the West... Read more
By jrdngruber
Evening all. In search of a good throttle cable linkage (return spring bracket as well) set-up for my duster. 318 auto. I got a trans kickdown cable but not installed yet. Lever wasn’t even on there when I got the car. Also need the spring for the throttle lever on the side of the 904. Linkage set-ups have always given me anxiety and I know a lot of the stuff is homemade and I really don’t care what it looks like so long as it’s functional. Edelbrock electric choke (600) with a torque plate... Read more
By Matt Andrews
I just bought a 993 cup. I do intend to race it. But I'd also like to have the parts that it would have initially shipped with. Anyone know where a good condition set of the original seats could...
By jblueridge
I need to get access to the wires running to my diff lock switch. How do I get the switch out of the plastic housing mounted to the dash?
By fdeandrade
Complete tool set of Hazet, Snap On, Koken, Knipex and a few others. The toolbox is set up as either a shop workstation with a built in light, power strip and 6 different torque wrenches (Precision...
By Stonebacon69399
My buddy bought a 98 and hes seems to be getting around 14 pretty consistently that seems a bit low to me is that normal? With it being EFI and having overdrive I would expect better as my carbed...
By HashishJackson
Just refreshed my suspension and going through the pulled off parts and noticed some very strange differences between front and rear LCAs hope someone can correct me but I believe these are the...
By DTC72
Mike and I have been talking for the last several months and we both agreed that we can't let a year go by without a Pig Party. I have been to the last four PP's and Mike has been to the last three PP's. We were hoping someone would pick up the planning for 2026 since we planned both 2024 and 2025. Mike @mike_az has a mostly stock 1977 FJ55 and mine is a restomod 1969 with a 2F, 5-speed, and Holley Sniper. Another friend of mine, Scott @ssipple65 , will be joining us in his... Read more
By matthon
Looking for inner fender metal splash shields. Each side has one bolted to the firewall, and one behind the headlights. I have the front right headlight shield. Also, 1 long frame splash shield. Pic shows 2 short and 1 long. I need the other long shield. Not sure at the moment which side I have, I can check, but it will be the opposite shape.
By mickey809
Hello, I own an 4.2 SC. For some time now, I’ve been getting an 2 occasional DTCs: 1. P0026-77 (Intake valve control solenoid – circuit range/performance (bank 1) 2. P0028-77 (Intake valve control...
By meathead42
I found a really nice 2021 Civic EX. Well taken care of, solid carfax. car has so many options I can’t test everything as I don’t know everything. I own a 2006 civic lx so this is major upgrade. They want 20k and it has 39k miles on it. Is this a good car and what should I be looking for before handing over a payment for this vehicle. Thank you!
By thisollandcruiser
I've meaning to do this introduction for a while. I've been grateful for this community of FJ60 wizards and will still definitely need more help. I purchased this FJ60 a year or so ago and am loving the process of fixing issues. (Of which there are many). We're planning on using this as our adventure rig and project for the foreseeable future. It has been desmogged, and has had a Weber carburetor installed prior to my owning it. Along with the pictures of the car, I've added a picture from... Read more
By jamesp347
Greetings all, I have a 2024 911 Turbo S with 1,100 miles. After getting it back from its two year service I noticed that there was some oil residue all over the bottom of where the inlet tube...
By 997Fanatic997
I've long since replaced my sport chrono with the 997 research digital clock. I've had the OEM clock on a small display with a few die-cast models as shown, but what I'd really like to do is combine...
By Wheelytech
I’m in The process of pulling apart my new to me 74 fst for a full build as a hard top. No remaining factory soft top parts or doors were with the truck it did coMe with parts and doors to build a hard top. A couple questions I have a single wire coming out of the top left of the windshield frame. Is that for dome lamp or somthing? Also I’ve seen people talk about fst door hinges vs standard door hinges. Whats the difference does anyone have side by side pictures? Off I have fst hinges... Read more
By 66 Sat
Now that my car has reached the dizzy heights of 101mph in the quarter I thought it was time to pull out all the old tricks to see what effect they would have on performance. I got thinking about the intake temperatures and how hot the air must be that the carb is sucking. If it's an average day here, say 70°F in the winter and 85°F in the summer (it will get to 105°F on really hot days), the air going in the carb must be 120°+ at a guess. With my unsilenced air cleaner it has that 1" gap... Read more
By Christopher2
I have the rear axle that came out from under Henry sitting here, and I really don’t have the room or any use for it. It was still under Henry at 9:00 this morning, and he drove and the brakes...
By rjrobin2002
Had one cylinder that got some water in it and I gave it a slight stone hone and then ball hone. 3 spots about 1/2" diameter didn't come out. Put some fresh cast rings in that one hole. Do yall think the 3 spots are gonna cause a compression or oil consumption issue?
By Modelo
Selling my low miles E55 AMG been mostly garage and hardly driven. Purchased the car with 52K miles on the odometer six years ago, Ive put in 8K miles since. Up grades are. Long tube headers...
By dustyzed
Probably a long shot but looking to trade my 997.2 C4S manual for a 996 GT3 in any color. Can add cash as necessary. My car has 39,100 miles in meteor gray metallic. Car is manual, has full...
By Duster360LA
Attached is a flier and entry form for a Mopar Show in San Antonio on Oct. 24. Since San Antonio is fairly central, I thought we might be able to get a dozen or so Texas FABO members to attend so we could meet and visit face to face. Hope to see some folks there!
110 listed, 26 connected and bringing in items.
Know a publication, forum or channel we should list? Suggestions go to a review queue; nothing is connected until rights and identity are checked.
